When Your Hot Water System Suddenly Stops Working: What to Do
When Your Hot Water System Suddenly Stops Working: What to Do
Blog Article
The article author is making several good pointers regarding How to Troubleshoot and Repair an Electric Water Heater overall in this content on the next paragraphs.
Many modern-day residences use an electrical hot water heater for their heating unit, because of its benefit as well as convenience of use. Nonetheless, much like any other electric home appliances, issues may occur with its use, unexpectedly. It can be truly aggravating to get up to a cool shower instead of a warm one or having your bath with water that isn't hot sufficient or even as well hot. Whatever the situation may be, hot water heater troubles can be rather nerve-racking. Luckily, we have actually made a checklist of possible options to your hot water heater problems. There are a number of variables that can cause much of these issues, maybe an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you turn off the main power supply for security. Whatever the trouble is, getting it dealt with should not posture excessive of an issue if you comply with these steps:
Call A Specialist:
If after replacing all damaged components and resetting your temperature, the water heater still isn't working, you may require to contact a specialist plumber for an expert point of view. The trouble with your heater could be that the hot and cold faucets have actually been switched or it may be undersized for the quantity of hot water required in your house. Whatever the situation might be, a specialist plumber would certainly assist resolve the problem.
Check Your Power Supply:
As fundamental as this might appear, it is very essential. Without sufficient power, your hot water heater will not work. So the first thing to do when your water instantly stops working is to verify that it isn't a power trouble. Check if the fuse is burnt out or the breaker stumbled. If the circuit breaker is the problem, merely turn it off and on once more. Replace any busted or damaged fuse. Evaluate the appliance with power after these changes to see if it's now working.
Examine Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't hot sufficient, you might require to check the temperature level settings on your top thermostat. Make sure the circuit breaker is turned off prior to doing anything. Open the accessibility panel and press the red switch for temperature level reset over the thermostat. This ought to aid heat the water. Turn the circuit breaker back on as well as check if the issue has actually been resolved.
Inspect the Burner in the Hot Water Heater:
If it's not a power problem, then try checking out your heating element if it is still functioning. Test each of your heating elements to make sure the issue isn't with any one of them. If any one of them is defective, replace that part and after that inspect whether the warm water is back on.
Verdict
Hot water heater issues are not always significant. Most of them are because of minor concerns like a blown fuse or worn-out burner. Changing the damaged parts ought to do the trick. Nonetheless, if you are still unable to fix the problem, give a call to your closest plumber ahead to get it repaired.
8 possible reasons why you have no Hot Water
Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.
Water Leak
Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.
Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.
Gas Heater: Gas Leak
If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.
Gas Heater: Pilot Light Problems
There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.
Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.
Gas Heater: Faulty Thermocouple
The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.
Electric Heater: Breaker Blues
Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.
Electric Heater: Reaching The Limit
If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.
Electric Heater: Heating Element
If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.
https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/
We had been made aware of that report on Hot Water Heater Repair through a good friend on another website. Remember to take the opportunity to promote this write-up if you liked it. I thank you for reading our article about What Would Cause My Electric Water Heater to Stop Working?.
Quality first, dial! Report this page